Tech

The Kiwi Ears Ardor are a set of over ears headphones that have Bluetooth, AUX cable and USB-C connectivity. They also include active noise cancelling (ANC) and can be used to make and receive calls when attached to a phone.

In this article we will look at the headphones, what their features are, how they operate, and how they sound.

It should be noted that Kiwi Ears sent me the headphones for review, but they did not read the review before hand and do not get a final say in the opinions of the review.

The box the Ardor came with was well constructed, and even had a couple of air holes that allowed the box to slide open easily, which is a nice design touch. Inside the box was the Ardor case, which contained the headphones, the included cables and the instruction manual.

I was doing some research into the Raspberry Pi a while ago and I happened to come across a neat little enclosure for the Raspberry Pi Compute Module 4 (CM4) called the uConsole.

The CM4 is essentially a normal Raspberry Pi 4, but it comes without the normal USB/HDMI interfaces that the Pi 4 comes with. This means that in order to use the CM4 you need to plug it into a separate PCB, which then provides the interfaces needed to attach monitors and peripherals.

This is where the ClockworkPi uConsole comes in. The uConsole (or micro console) is an enclosure for the CM4 that features a built in screen and keyboard, a track ball, small speakers, a battery pack, and an optional mobile network card.

Somewhat recently, I was introduced to the concept of customisable mechanical keyboards. I do a lot of typing, mainly writing/story work, so the tool I use is quite important, I’ve just never given it much thought before.

My old keyboard was a Topmate K22, which is a pretty basic keyboard. I’ve recently been gifted a mechanical one that uses a Weikav Lucky65 V2 as a frame.

It turns out mechanical keyboards are pretty neat. Though they’re better than normal keyboards in almost every way, they also have their own, rather unique, problems.

In this article I will look at the Weikav Lucky65 V2 keyboard, the switch and keycaps selection used and a look at using VIA to configure the keyboard.

I got into mechanical keyboards a few years ago, around the same time that I started to work from home. Since then I have collected a number of different keyboards of different sizes and orientations, mostly in a drive to have a nice feeling keyboard, increase productivity and reduce my RSI.

Whilst keyboards look similar to the uninitiated there are quite a lot of different factors that go into the mechanical keyboard. In fact, there are so many different terms used in the mechanical keyboard world that might need some explaining before you get into things.

In this article I will look into some of the different types of keyboards available by breaking down some of the terms used. I'll then give some recommendations on where to get started, and what to avoid.

This is an introduction and is by no means a complete picture of every sort of keyboard available.

I was scrolling through The Pi Hut website recently and my eye was drawn by a case for the Raspberry Pi Computer Module 4 (CM4) that looked like a modified Nintendo Gameboy. I had bought a CM4 for another project, but as that project wouldn't be delivered for a few months I was looking for something useful to do with the CM4 in the meantime.

The GPi Case 2 from Retroflag is a case that accepts the Raspberry Pi Compute Module 4 (CM4) and is used as an emulation station. Using the right software, it is possible to add files to the system that allow you to play games from a variety of different platforms. If you go for the WiFi CM4 you can also connect Bluetooth controllers to the unit and even use WiFi to transfer files.

I have a lot of CDs. It isn't a "serious" collection, but I have been collecting CDs for at least 30 years so I have a couple of hundred there.

Taking a large CD collection everywhere with you isn't feasible, so I've been ribbing my collection to MP3 for a number of years. Recently, I've started to notice that MP3 doesn't have amazing sound quality, which is more apparent on higher quality audio equipment. MP3s are fine for cars and similar, but not ideal for listening on more serious sound systems.

Since my CD player died a few years ago I have been unable to listen to them in any other way. There is just something about the physical experience of playing music from a medium like the CD that appeals to me so I have still been buying CDs since then.